Introduction:
TS-BLUE are adopted special top quality sealing materials of synthetic fiber with macromolecular, which are mixed with special inorganic minerals packing to resistant high temperature.
Application
TS-BLUE are used in the industries with gas, hydrocarbon, solvent, low pressure steam, weak acid and alkali etc. They are applied to some industries of food, mechanical, chemical engineering, petroleum and so on. TS-BLUE are approve with WRC Drinking Water Audit.
Technical Data (Tested sample with thickness of 2mm)

Density	DIN 3754		1.85	g/cm3
Service limits*:
Max.short term temperature			235	oC
Max.continuous operating temperature with non-aggressive media			270	oC
Max.continuous operating temperature with steam			230	oC
Max.operating pressure			100	bar
Compressibility	ASTM F36		7.5	oC
Recovery Rate	ASTM F36	min.	55	oC
Stress retention:	DIN52913
16hrs,175oC,50N/mm2		min.	>35	%
16hrs,300oC,50N/mm2		min.	>30	N/mm2
Tensile Strength(across grain)	DIN 52910	min.	7	N/mm2
Immersion test in ASTM Oil 3 for 5 hrs.at 150oC--thickness increase	ASTM F146		7	N/mm2
Immersion test in ASTM Fuel B for 5 hrs. at 20oC--thickness increase	ASTM F146	max.	7

Supply Data

Color:	Blue
sheet Size -Standard Upon request:	1500*1500mm	Tolerance :±50mm
Thickness:	1500*3000; 1500*4500mm
Thickness	0.3~5.0mm	Tolerance : ±10%

According to different requirement of installation and operation condition, the application and processing technical also are different, so this reference only as unfixed guidelines. Therefore, it can’t be deducted any guarantee requirements according to these data.