Introduction:
ISOPLAN is composed of special ceramic and mineral fiber, after it mixed with stuffing and adhesive, it has the property of high temperature resistance. Because of it has very small coefficient of heat conduction, the heat insulation is outstanding.
Application
As it has the property of stand with very high temperature and small coefficient of heat conduction, the application scopes are as follows:
Iron and steel industry;
Smelt and casting industry;
Industry stove and stove making;
Stoves and dry equipment;
Engineer and equipment building;
Electricity equipment;
Glass industry.
The specification of ISOPLAN sheets are available:
W 1000mm x L 1000mm
Thickness(mm): 1,3/1.5/2/0/3.0/4.0/5.0/6.0/7.0/8.0/9.0/10.0
The tolerance is 10%
ISOPLAN 750 Technical Data Sheet
Sample thickn 3.0mm
ISOPLAN 750 Technical Data Sheet

Property	Standard	Unity	Value*
Density	DIN 28 090-2	[g/cm3]	0.94
Tensile strength	DIN 52 910
longitudinal		[N/mm2]	3.5
transverse		[N/mm2]	1.5
Compressibility	ASTM 36 K	[%]	≤25
Recovery	ASTM 36 K	[%]	≥25
Loss on ignition	DIN 52 911	[%]	17
Decrease in thickness	1h/800oC	[%]	≤25
Shrinkage by surface	1h/800oC
longitudinal		[%]	≤2
transverse		[%]	≤2
Heat conduct.at400oC average		[w/(m*k)]	0.13